Advertisement
Knifonium
Plugin Manual
2
1
3
4
5
Mod Source Aftertouch
1
Switches how the aftertouch intensity influences the VCO's pitch.
+: a higher aftertouch intensity raises the pitch
-: a higher aftertouch intensity lowers the pitch
Off: aftertouch does not modulate the pitch
Mod Source Ext1
2
Switches how the external signal Ext 1 influences the VCO's pitch.
+: a higher ext signal raises the pitch
-: a higher ext signal lowers the pitch
Off: ext signal does not modulate the pitch
Spread
3
A plugin-only feature, this adjusts the stereo width of each oscillator separately.
A handy feature to add width to your sounds.
Osc Sync (On/Off)
4
Switches oscillator sync on or off. VCO 2 is the master, VCO 1 is the slave
oscillator.
Sync Mod Source
5
Switches the modulation source for the sync.
If set to AT or MW, a certain Aftertouch resp. Mod Wheel threshold must be
exceeded to engage the sync.
5
Advertisement
