Advertisement
Knifonium
Plugin Manual
2
4
1
3
5
6
Pitch Bend & Mod Wheel
Pitchbend
1
Sets the maximum pitch offset that can be achieved via Pitchbend in semitones.
If set to A, an adjustable offset range can be set via the Pitchbend Adjust trim
screw.
Osc 1
2
Selects if the Pitchbend should modulate VCO 1's pitch.
Osc 2
3
Selects if the Pitchbend should modulate VCO 2's pitch.
Pitchbend Adjust
4
Sets the pitch offset for the adjustable mode. The maximum range is 2
semitones (200 cents)
MW Scale
5
Sets the scaling of the Mod Wheel.
MW Dest
6
Sets the destination that is modulated by the Mod Wheel.
Independent of this setting, the Mod Wheel can modulate the following
parameters when selecting it as a modulation source:
VCO 2 Level, Ring Mod Level, Noise Level, Osc Sync.
21
Advertisement
