Advertisement
Knifonium
Plugin Manual
A word on CPU usage
We have modelled the electronic circuit boards and tubes in a way which
makes the Knifonium a very accurate reproduction of the hardware version.
The technology we use to enable us to reach this level of accuracy produces
what we think is the most "analogue" sound which can be achieved using a
plugin. This is vastly different from other technologies like sampling.
This is why a plugin like the Knifonium (and any plugin aiming at a faithful
reproduction) will need hardware resources (CPU, Memory). We have made
sure that any somewhat modern hardware is able to run several instances
of Knifonium. If you run into resource problems, we recommend you lower
the voice count. And in case you are running at more than 48kHz sample
rate, consider lowering it to 48kHz or 44.1kHz.
Voice Handling
As with the hardware, when playing one voice the highest note will always take
priority. When adding more voices priority will be given to the note following.
39
Advertisement
