Advertisement
Knifonium
Plugin Manual
4
2
3
1
Keyboard (KB)
1
Switches if the VCO's pitch is influenced by the keyboard's CV. If set to off, the
keyboard's CV is ignored and the pitch is determined by the tune parameters
and modulations only. The keyboard's Gate output is not changed by this
parameter and will still influence the VCO per the envelope settings.
The plugin is referenced to the global tune A4 (default 440 Hz) with Octave set
to 8', Coarse Tune and Fine Tune set to 0.
However, the KB tracking is referenced to the note C3 like in the hardware.
Mod Amount
2
Sets the general amount of modulation that is applied to the VCO's pitch. This
needs to be set above 0 to enable S&H pitch modulation.
Mod Source Env1
3
Switches how the CV of envelope 1 influences the VCO's pitch.
+: a positive Env1 CV raises the pitch
-: a positive Env1 CV lowers the pitch
Off: the Env1 CV does not modulate the pitch
Mod Source LFO
4
Switches how the CV output of the LFO influences the VCO's pitch.
+: a positive LFO voltage raises the pitch
-: a positive LFO voltage lowers the pitch
Off: the LFO voltage does not modulate the pitch
4
Advertisement
