Advertisement
Knifonium
Plugin Manual
1
Switches if the LFO is retriggered by every keyboard (gate) signal or if it
works in free-running mode. In Single mode, only the LFO on the voice which
triggered a new gate signal will be reset. In All mode, all LFOs on all voices will
be reset by every new gate signal, no matter which voice triggered the gate.
This function differs from the hardware as the hardware is only monophonic.
2
Sets the symmetry of the LFO waveforms. This changes durations of the first
and second half of the waveform, e.g. for a pulse wave this is equal to changing
the pulse width.
2
3
3
1
4
Sets the LFO amplitude. The maximum peak to peak value is 5 Volts.
4
Switches modulation of the LFO amplitude on or off. If engaged, it can be
modulated by the Mod Wheel. Mod Wheel Dest must be set to „LFO G" to enable
the modulation.
Keyboard Trigger
Symmetry
Amplitude
Amplitude Mod
11
Advertisement
