Advertisement
Knifonium
Plugin Manual
3 2
1
4
Output
Master Volume
1
Sets the master volume.
Tip: By increasing the 'Master Vol' parameter you can add more harmonics/
dirt/saturation to your sounds as this is 'driving' the output amp (see 4. Amp
Mode). If you would like to increase or decrease the volume without adding any
character you can use the 'Output' parameter found at the right corner of the
toolbar.
LFO to VCA
2
If engaged, LFO output controls the VCA. The LFO signal is summed with the
other VCA control voltages (Env 2, AT, Feedback).
VCA Mode
3
Boost mode gives a gain staging option for the VCA tube stage. When boost is
engaged, the audio signal is boosted by 12 dB at the VCA input and attenuated
by 12 dB at the VCA output.
Amp Mode
4
Selects one of three output amp tube modes: Triode, Pentode, Saturated.
Experiment with these different modes to change the colour of a sound.
19
Advertisement
