Advertisement
Knifonium
Plugin Manual
Wavefolder
1
1. Folds
Sets the amount of wavefolding and thus generated harmonics. The amount of
generated harmonics is also highly dependent on the input level. If the folded
signal is still too clean with high fold values, try to raise the input level (e.g. Knifo-
nium's master volume or oscillator levels). If the folded signal is too distorted at a
very low fold value already, try to lower the input level.
1
2. Mode
The module contains two different wavefolding processors which can be mixed
via the Mode knob. Turning the knob fully counter-clockwise selects the „sine"
wavefolding. Turning the knob fully clockwise selects a „sinc" based wavefolding.
Using the sinc mode with a low input signal and/or low Folds setting can achieve a
kind of „gated" signal.
3. Frequency
Sets the cutoff frequency of the output filter.
4. Resonance
Sets the resonance of the output filter.
32
Advertisement
