YASKAWA Varispeed F7 Connection Manual page 40

External Device Settings
To configure communication settings, use the ENTER, Up, Down, or Shift/RESET key on the digital operator
located on the front of the inverter. Refer to your External Device manual for details.
1
Press the Up key to display [STUP].
2
Press the ENTER key.
3
Press the Up key to display the parameter you want to set.
4
Press the ENTER key.
5
Press the Up, Down, or Shift/RESET key to display the setting value.
Parameter No.
b1-01
b1-02
H5-01
H5-02
H5-03
H5-04
H5-05
H5-06
H5-07
H5-09
6
Press the ENTER key.
7
Reboot the External Device.
This completes the setting of the External Device.
GP-Pro EX Device/PLC Connection Manual
Settings
2 Frequency Reference Selection 1
2 Run Command Selection 1
01 Node Address Setting (HEX)
3 Communication Speed Selection
1 Communication Parity Selection
3 Stopping Method After Communication Error
1 Communication Fault Detection Selection
5 Drive Transmit Wait Time
1 RTS Control Selection
2.0 CE Detection Time
40
Setup Description
Inverter SIO Driver