Specifications For Your Target System's Connection To The Emulator; Buffering Signals Between The Emulator And The Target System - Spectrum Digital XDS510PP Installation Manual

Specifications for Your Target System's
This chapter contains information about connecting your target system to
the emulator. Your target system must use a special 12-pin connector
for proper communication with the emulator.
Topic
2.1 Designing Your Target System's Emulator
Connector (12-pin Header)
2.2 Emulator Cable Pod Logic
2.3 Emulator Cable Pod Signal Timing
2.4 Buffering Signals Between the Emulator and the
Target System
2.5 Mechanical Dimensions for the 12-Pin Header
Connection to the Emulator
Chapter 2
Page
2-2
2-3
2-4
2-5
2-7
2-1