SMC Networks PSE3AC Series Operation Manual page 30

Setting of the upper limit of the additional rated range
Press or
button to change the value.
Press the button continuously to keep changing
the value.
Set the value that is required to be displayed
when the sensor input signal is 100%.
The setting range is -1500 to 1500 digit.
Press the button to set.
Display unit setting
Press the or
: The unit that can be displayed is different depending on the pressure range. (Refer to page 27)
(kPa/MPa/Pa can still be selected if the product does not have the units selection function.)
Press the
Switching setting of switch output NPN/PNP specifications
The switch output of this product can be switched to NPN or PNP output in accordance with the
user device construction.
Press the or
Press the
[F 0] Setting of the switching function of the pressure range, display unit and
Move on to display unit setting.
button to select the display unit.
button to set.
button to select switch output specification.
button to set.
switch output specifications is completed.
-29-
Move on to the switch output NPN/PNP
specification switching setting.
Return to function selection mode.
No.PS※※-OMU0012-A