Change Site Status; Main Menu - Tunstall ConnectCall User Manual

Change Site Status

This screen enables the user to change the current site status to On Site, Local Offsite (optional) and
Off Site. When in On Site mode, an alarm's call group settings are processed as normal. In Off Site all
alarms calls are routed to the specified control centre.
The site status is changed by pressing the illuminated key next to the site status. When the required
status is displayed press 'Set' to save the settings and the SCP will return to the Initial Screen.

Main Menu

The main menu allows the user 4 options:
Call Menu
Trigger Menu
Settings
Access Ctl
Advanced
Exit
Pressing the illuminated key next to any of the 4 options will take the user to the appropriate menu.
Pressing the illuminated key next to the arrow on the right of the screen will show the final menu
option of Advanced.
Site Status
On Site
Set?
Figure A.3
Allows the user to place calls, broadcast speech.
Allows the user to view, assign and delete residents' triggers.
Allows the user to change date, time, and site status and turn keypad beeps
on or off.
Allows the user to add and remove access fobs
Allows the user to go to a 'Restart' or the engineer to go to 'Engineer'.
Exits to Initial Screen
Call Menu
Trigger Menu
Settings
Access Ctl
Figure A.4
Exit
>
Exit