PASCO Wireless Smart Gate Reference Manual page 9

PS-3225
Connect the Sensor Wirelessly via Bluetooth in SPARKvue
1. Turn on the sensor and start SPARKvue.
• The "choose a path" window opens.
2. To "pair" the Wireless Smart Gate wirelessly to the computing device (e.g., computer or tablet), click or touch
"Sensor Data" in the "choose a path" window.
• The "Sensor Data Configuration" screen opens
3. In the "Sensor Data Configuration screen", look in the "Connected Devices" list. Touch or click to select the
correct address that matches the Device ID XXX-XXX number found on the Wireless Smart Gate.
• A message confirms that the sensor is being connected.
• Next, in the "Sensor Data Configuration" screen, "Wireless Smart Gate" appears in the "Select Measurement
for Templates" panel,
4. Click or Touch the "gear-shaped" Configuration Icon
• The "Assign SmartGate" screen is revealed.
Connect the Sensor Wirele ssly via Bluetoo th in SPARKvue
.
013-16123A
.
Click or Touch
Click or Touch
the
Configuration
Icon
9