Alignment Of The Flexible Screw Conveyor To The Pellet Store - Viessmann VITOLIGNO 300-C Installation And Service Instructions Manual

Installation

Alignment of the Flexible Screw Conveyor to the Pellet Store

Legend
A Pellet discharge or connector at the pellet silo
B Hose with screw conveyor
B
*
Legend
A Pellet discharge or connector at the pellet silo
B Minimum bending radius
30
Vitoligno 300-C Installation/Service
The pellet supply with flexible screw conveyor can either
be connected to the room discharge with screw conveyor
supply system or to a pellet silo.
The pellet silo or room discharge adaptors as well as the
drive unit of the flexible screw conveyor on the Vitoligno
can be fitted in different positions.
Dimension a
Dimension b (hose length)
* Note: Observe the minimum bending radius of the flexible
screw conveyor.
in. min. 67
(mm) (min. 1700)
in. min. 55
(mm) (min. 1390)