Connecting The Dc Input Power Cable - Huawei SUN2000 Series User Manual

Figure 5-9 Securing the AC connector
Step 3 Check the route of the AC output power cable.
Figure 5-10 Cable route
----End
Disconnection
Disconnection can be performed in reverse order.

5.4 Connecting the DC input power cable

Precautions

Before connecting the DC input power cable, ensure that the DC voltage is within the safe
range (lower than 60 V DC), and that the DC SWITCH is set to the OFF position. Failure
to do so could generate high voltage, which may cause electric shocks.
 When the SUN2000 is operating, it is not allowed to operate the DC input power cable,
such as connecting or disconnecting a PV string or a PV module in a PV string. Failing to
do so may cause electric shocks.

If no PV string is connected to a DC input terminal of the SUN2000, do not remove the
watertight cap from the terminal. Otherwise, the IP rating of the SUN2000 will be
affected.
Issue 02 (2019-04-30) Copyright © Huawei Technologies Co., Ltd.
SUN2000-(3KTL-10KTL)
User Manual
Page 43 of 81