Connecting The Ac Output Power Cable - Huawei SUN2000 Series User Manual

Step 2 Connect the PE cable.
Figure 5-3 Connecting the PE cable
----End

5.3 Connecting the AC Output Power Cable

Precautions
A three-phase AC switch needs to be installed on the AC side of the SUN2000. To ensure that
the SUN2000 can safely disconnect itself from the power grid when an exception occurs,
select a proper overcurrent protection device in compliance with local power distribution
regulations.
Do not connect loads between the SUN2000 and the AC switch.
The SUN2000 is integrated with a comprehensive residual current monitoring unit. Once
detecting that the residual current exceeds the threshold, the SUN2000 immediately
disconnects itself from the power grid.
Issue 02 (2019-04-30) Copyright © Huawei Technologies Co., Ltd.
SUN2000-(3KTL-10KTL)
User Manual
Page 39 of 81