Connecting The Dc Input Power Cable - Huawei SUN2000 Series User Manual

SUN2000-(8KTL-20KTL)-M2
User Manual
Ensure that the AC connector is connected securely.
Figure 5-10 Securing the AC connector
Step 3 Check the route of the AC output power cable.
Figure 5-11 Cable route
----End
Disconnection
Disconnection can be performed in reverse order.

5.4 Connecting the DC input power cable

Precautions
● Before connecting the DC input power cable, ensure that the DC voltage is
● When the SUN2000 is operating, it is not allowed to operate the DC input
● If no PV string is connected to a DC input terminal of the SUN2000, do not
Issue 01 (2020-07-02)
NO TICE
D ANGER
within the safe range (lower than 60 V DC), and that the DC SWITCH is set to
the OFF position. Failure to do so could generate high voltage, which may
cause electric shocks.
power cable, such as connecting or disconnecting a PV string or a PV module in
a PV string. Failing to do so may cause electric shocks.
remove the watertight cap from the terminal. Otherwise, the IP rating of the
SUN2000 will be affected.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
41