Connection; Electrical Connection; Electrical Connection Scheme - Kernau KGH 4345 T CI B User Manual

ELECTRICAL CONNECTION

1. Setting conditions of this appliance is indicated in tag or data plate.
2. Your appliance should be plugged in a fuse appropriate for electric power.
If necessary, it is recommended that installation is done by authorized service.
3. Your appliance is configured in accordance with electrical supply of 220-240V
50/60Hz.
4. If main electrical network is different from these values, contact with your
authorized service.
5. Electrical connections of your appliance should only be made to the fuses having
suitably wired grounding (grounded) system. If no convenient fuse is available
in the place where your appliance is to be installed, contact with authorized
service immediately. Manufacturing firm is not responsible definitely for the
damages that fuses whose grounding is not made and connected to the appliance
can cause.
6. Plug of the appliance should be close to be accessed easily to the fuse whose
grounding is made without use of extension cord.
7. Do not allow contacting the power cable of your appliance with hot regions.
Similarly, keep away it from sharp edges and corners.
8. If feeder cord is damaged, this cord should be replaced either by manufacturer or its
service agency or same degree qualified personnel in order to hinder a dangerous
situation.
9. Wrong electrical connection may give damage to the appliance.In this case,
your appliance will remain out of guarantee scope. Electrical connection of your
appliance should be done by authorized service.

ELECTRICAL CONNECTION SCHEME

Get electrical connection of your appliance done to authorized person in line with the
following scheme.
CHAPTER 4. CONNECTION
EN
40
220-240 V ~ 50/60 Hz
L1
Neutral
Neutre
Earth
Terre
Erdung
H05 VV-F 3G 1.5 mm²