Troubleshooting - Kernau KGH 4345 T CI B User Manual

You may solve the problems you may encounter with your product by checking the
following points before calling the technical service.
Check Points
In case you experience a problem about the cooker, first check the table below and try
out the suggestions.
Problem
No Ignition.
Not Proper Ignition.
Noise coming when
burning or during
ignition.
Flame turns off during
operation.
CHAPTER 10. TROUBLESHOOTING
Possible cause
No sparks.
Cooker cover is not fitted
properly.
Gas supply is closed.
Gas supply not fully open.
Cooker cover is not fitted
properly.
Ignition plug is clogged with
foreign materials.
Hobs are wet.
Flame spreader holes are
clogged.
Cooker cover is not fitted
properly.
Flame observer device is
clogged by foreign material.
Overflow food turns off the
flame.
A strong air flow turns off the
flame.
Remedy
Check power supply.
Fit the cover properly.
Fully open gas supply.
Fully open gas supply.
Fit the cover properly.
Wipe off foreign materials
with a cloth.
Carefully dry the hobs.
Clean the flame spreader.
Fit the cover properly.
Clean flame observer device.
Switch off the hob. Wait for
one minute and ignite again.
Please check related hob
and check the cooking area
for air flows, for example,
from an open window. Wait
for one minute and ignite
again.
EN
57