Chapter 2. Electrical Connection; Electrical Connection Scheme - Kernau KGH 6464 User Manual

1. Setting conditions of this appliance is indicated in tag or data plate.
2. Your appliance should be plugged in a fuse appropriate for electric power. If necessary, it is
recommended that installation is done by authorized service.
3. Your appliance is configured in accordance with electrical supply of 220-240V 50/60Hz.
4. If main electrical network is different from these values, contact with your authorized service.
5. Electrical connections of your appliance should only be made to the fuses having suitably
wired grounding (grounded) system. If no convenient fuse is available in the place where
your appliance is to be installed, contact with authorized service immediately. Manufacturing
firm is not responsible definitely for the damages that fuses whose grounding is not made and
connected to the appliance can cause.
6. Plug of the appliance should be close to be accessed easily to the fuse whose grounding is made
without use of extension cord.
7. Do not allow contacting the power cable of your appliance with hot regions. Similarly, keep
away it from sharp edges and corners.
8. If feeder cord is damaged, this cord should be replaced either by manufacturer or its service
agency or same degree qualified personnel in order to hinder a dangerous situation.
9. Wrong electrical connection may give damage to the appliance.In this case, your appliance
will remain out of guarantee scope. Electrical connection of your appliance should be done by
authorized service.

ELECTRICAL CONNECTION SCHEME

Get electrical connection of your appliance done to authorized person in line with the following scheme.

CHAPTER 2. ELECTRICAL CONNECTION

220-240 V~50/60 Hz
L1
H05 VV-F 3G 1,5 mm²
35
Neutral
Neutre
Earth
Terre
Erdung