Download Print this page
MadgeTech PRTemp1000IS Product User Manual

MadgeTech PRTemp1000IS Product User Manual

Intrinsically safe pressure and temperature data logger

Advertisement

Quick Links

Description
Temperature Sensor
Temperature Range
Temperature Resolution
Calibrated Accuracy
Pressure Range
Pressure Resolution
Pressure Accuracy
Memory
Reading Rate
1 reading every 2 seconds up to 1 reading every 12 hours
Units
PSIA(G), inches, altitude, Torr, mmHg, Pascals
Required Interface Package
Baud Rate
Typical Battery Life
Operating Environment
-40 °C to +80 °C (-40 °F to +176 °F), 0 %RH to 100 %RH
Material
Dimensions
6.4 in x 1.25 in dia. (163 mm x 32 mm dia.)
Weight
Approvals
*PRTemp1000IS
0-30
0-100
Range (PSI)
PSIA/PSIG
PSIA/PSIG
Accuracy
Resolution (PSI)
0.002
0.005
BATTERY
WARNING:
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD.
DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE,
CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED
ABOVE 80 °C (176 °F).
Specifications subject to change.
See MadgeTech's terms and conditions at madgetech.com
MadgeTech, Inc.
6 Warner Road
Phone (603) 456.2011
madgetech.com
PRTemp1000IS
Internal semiconductor
-40 °C to +80 °C (-40 °F to +176 °F)
0.1 °C (0.18 °F)
±0.5 °C (±0.9 °F)
*See Table Below
16,383/channel
IFC200
2,400
1 year
303 stainless steel
12 oz (340 g)
CE, IS Rated
0-300
0-500
0-1000
0-5000
PSIA/PSIG
PSIA/PSIG
PSIA
PSIA
2 %FSR, 0.25 % @ 25 °C typical
0.02
0.05
0.05
0.2
Warner, NH 03278
l
Fax (603) 456.2012
l
info@madgetech.com
l
DOC-1124036-00 REV 1 2020.09.09
Product User Guide
PRTemp1000IS
Intrinsically Safe Pressure and Temperature Data Logger
PRTemp1000IS
To view the full MadgeTech product line,
visit our website at
madgetech.com.

Advertisement

loading

Summary of Contents for MadgeTech PRTemp1000IS

  • Page 1 DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F). Specifications subject to change. See MadgeTech’s terms and conditions at madgetech.com MadgeTech, Inc. 6 Warner Road Warner, NH 03278 Phone (603) 456.2011...
  • Page 2 - The battery is the purple cylinder on the circuit board, gently pull out the battery. O-ring maintenance is a key factor when properly caring for the PRTemp1000IS. The - Insert the new battery one lead at a time, pressing firmly with your index finger to make o-rings ensure a tight seal and prevent liquid from entering the inside of the device.