Glow-worm Easicom 3 24c Operating Instructions Manual page 5

Table of Contents

Advertisement

flue gas may escape into the
room air.
▶ In order to operate the
product, ensure that the con-
densate siphon is always full.
1.3.6 Risk of death due to
explosive and flammable
materials
▶ Do not use or store explosive
or flammable materials (e.g.
petrol, paper, paint) in the in-
stallation room of the product.
1.3.7 Risk of death due to lack
of safety devices
A lack of safety devices (e.g.
expansion relief valve, expan-
sion vessel) can lead to poten-
tially fatal scalding and other
injuries, e.g. due to explosions.
▶ Ask a competent person
to explain how the safety
devices work and where they
are located.
1.3.8 Risk of death due
to changes to the
product or the product
environment
▶ Never remove, bridge or
block the safety devices.
▶ Do not tamper with any of the
safety devices.
▶ Do not damage or remove
any seals on components.
▶ Do not make any changes:
0020239561_01 Easicom 3 Operating instructions
– The product itself
– to the gas, air, water and
electricity supplies
– to the entire flue gas install-
ation
– to the entire condensate
drain system
– to the expansion relief valve
– to the drain lines
– to constructional condi-
tions that may affect the
operational reliability of the
product
1.3.9 Risk of injury and
material damage due to
maintenance and repairs
carried out incorrectly or
not carried out at all
▶ Never attempt to carry out
maintenance work or repairs
on your product yourself.
▶ Faults and damage should
be immediately rectified by a
competent person.
▶ Adhere to the maintenance
intervals specified.
1.3.10 Risk of corrosion
damage due to
unsuitable combustion
and room air
Sprays, solvents, chlorinated
cleaning agents, paint, adhes-
ives, ammonia compounds,
dust or similar substances may
Safety 1
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Easicom 3 24c and is the answer not in the manual?

Questions and answers

Peter
March 26, 2025

How does easicom 3 25r know what heating temperature is required?

1 comments:
Mr. Anderson
March 26, 2025

The Glow-worm Easicom 3 24c determines the required heating temperature by allowing the user to set the heating flow temperature using the control buttons. The display shows the current heating flow temperature, and the user can adjust it by increasing or decreasing the selected setting. The system also considers the filling pressure in the heating installation and the operating mode, which are displayed on the basic display.

This answer is automatically generated

This manual is also suitable for:

Easicom 3 28c00100214010010021402

Table of Contents

Save PDF