Caring For The Product; Checking The Condensate Drain Pipework And Tundish; Decommissioning; Temporarily Decommissioning The Product - Glow-worm Easicom 3 24c Operating Instructions Manual

6.2 Caring for the product

Caution.
Risk of material damage
caused by unsuitable clean-
ing agents.
▶
Do not use sprays, scouring
agents, detergents, solvents
or cleaning agents that con-
tain chlorine.
▶
Clean the casing with a damp cloth and
a little solvent-free soap.
6.3 Checking the condensate
drain pipework and tundish
The condensate drain pipework and tun-
dish must always be penetrable.
▶
Regularly check the condensate drain
pipework and tundish for faults and,
particularly, for blockages.
You must not be able to see or feel any
obstructions in the condensate drain pipe-
work and tundish.
▶
If you notice a fault, have it rectified by
a competent person.

7 Decommissioning

7.1 Temporarily decommissioning
the product
▶
Temporarily decommission the product
only if there is no risk of frost.
▶
Switch off the product via the main
switch provided on-site.
◁
The display goes out.
▶
When decommissioning for an exten-
ded period (e.g. holiday), you should
also close the gas isolator cock and the
cold water stop cock.
0020239561_01 Easicom 3 Operating instructions
Decommissioning 7
7.2 Permanently
decommissioning the product
▶
Have a competent person permanently
decommission the product.

8 Recycling and disposal

▶
The competent person who installed
your product is responsible for the dis-
posal of the packaging.
If the product is identified with this
symbol:
▶
In this case, do not dispose of the
product with the household waste.
▶
Instead, hand in the product to a collec-
tion centre for old electrical or electronic
appliances.
If the product contains batteries that
are marked with this symbol, these bat-
teries may contain substances that are
hazardous to human health and the envir-
onment.
▶
In this case, dispose of the batteries at
a collection point for batteries.
9 Guarantee and customer
service

9.1 Guarantee

For information on the manufacturer's
guarantee, you can write to the contact
address that is provided on the back page.

9.2 Customer service

For contact details for our customer ser-
vice department, you can write to the ad-
dress that is provided on the back page, or
you can visit www.glow-worm.co.uk.
13