Table of Contents
Advertisement
4 Operation
Note
If the heating flow temperature
is shown in the display, press
and hold the
at the same time for longer than
five seconds, or temporarily
deactivate heating mode in
order to display the pressure.
2. Fill the heating installation. (→ Page 10)
4.4 Filling the heating installation
Caution.
Risk of material damage due
to heating water that is ex-
tremely calciferous or corros-
ive or contaminated by chem-
icals.
Unsuitable tap water damages
the seals and diaphragms,
blocks components in the
product and heating installation
through which the water flows
and causes noise.
▶
Only fill the heating install-
ation with suitable heating
water.
▶
In case of doubt, ask a com-
petent person for details.
Note
The competent person is respons-
ible for filling the heating installa-
tion the first time, any subsequent
top-ups and the water quality.
The operator alone is respons-
ible for topping up the water in the
heating installation.
1. Open all radiator valves (thermostatic
radiator valves) of the heating installa-
tion.
10
2. Slowly open the filling cock, as shown
3. Fill with water until the required filling
and
buttons
4. Check the filling pressure in the
5. Close the filling cock after filling.
4.5 Selecting the operating mode
▶
4.6 Setting the hot water
Conditions: The temperature is controlled by the
boiler
▶
Conditions: The temperature is controlled by the
controller
▶
Operating instructions Easicom 3 0020239561_01
to you by the competent person.
pressure is reached.
display.
Note
The unit is always activated with
the preselected operating mode.
Press
repeatedly until the display
shows the required operating mode.
Symbol
Operating mode
Heating + hot water
+
Heating only
Hot water only
‒
No requirement
temperature
Set the hot water temperature on the
boiler (→ Page 11).
Set the hot water temperature on the
controller.
Note
If you press the
the display shows the
bol.
or
button,
sym-
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Easicom 3 24c and is the answer not in the manual?
Questions and answers
How does easicom 3 25r know what heating temperature is required?
The Glow-worm Easicom 3 24c determines the required heating temperature by allowing the user to set the heating flow temperature using the control buttons. The display shows the current heating flow temperature, and the user can adjust it by increasing or decreasing the selected setting. The system also considers the filling pressure in the heating installation and the operating mode, which are displayed on the basic display.
This answer is automatically generated