Immergas MAGIS COMBO 4 V2 Instructions And Recommendations page 5

This book contains important information for the:
Installer (section 1);
User (section 2);
Maintenance Technician (section 3).
• The user must carefully read the instructions in the specific section (section 2).
• The user must limit operations on the appliance only to those explicitly allowed in the specific section.
• Every operation carried out on the heat pump (e.g. set up, inspection, installation and commissioning), must mandatorily be
performed by authorised personnel alone and in possession of a technical engineering or professional degree qualifying them to
perform these tasks. They must also have attended a refresher course acknowledged by competent authorities. This particularly
applies to personal specialised in C.H. and air-conditioning systems and qualified electricians who, due to their specialised trai-
ning, skills and experience are experts in the correct installation and maintenance of C.H., cooling and air-conditioning sy-
stems.
• The appliance must be installed by qualified and professionally trained personnel.
• The instruction booklet is an integral and essential part of the product and must be given to the new user in the case of transfer or suc-
cession of ownership.
• It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and
maintenance stages.
• In compliance with the legislation in force, the systems must be designed by qualified professionals, within the dimensional limits
established by the Law. Installation and maintenance must be performed in compliance with the regulations in force, according to the
manufacturer's instructions and by professionally qualified staff, meaning staff with specific technical skills in the plant sector, as pro-
vided for by Law.
• Improper installation or assembly of the Immergas device and/or components, accessories, kits and devices can cause unexpected
problems for people, animals and objects. Read the instructions provided with the product carefully to ensure proper installation.
• This instructions manual provides technical information for installing Immergas products. As for the other issues related to the instal-
lation of products (e.g. safety at the workplace, environmental protection, accident prevention), it is necessary to comply with the pro-
visions of the standards in force and the principles of good practice.
• All Immergas products are protected with suitable transport packaging.
• The material must be stored in a dry place protected from the weather.
• Damaged products must not be installed.
• Maintenance must be carried out by skilled technical staff. For example, the Authorised Service Centre that represents a guarantee of
qualifications and professionalism.
• The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and
therefore potentially dangerous.
• If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, standards or in-
structions contained in this booklet (or however supplied by the manufacturer), the manufacturer is excluded from any contractual
and extra-contractual liability for any damages and the device warranty is invalidated.
• In the event of malfunctions, faults or incorrect operation, turn the appliance off and contact an authorised company (e.g. the Authori-
sed Technical Assistance Centre, which has specifically trained staff and original spare parts). Do not attempt to modify or repair the
appliance alone.
GENERAL RECOMMENDATIONS
5