Installing The Indoor Unit; Description Of The Product; Installation Warnings - Immergas MAGIS PRO Series Instructions And Recommendations

Table of Contents

Advertisement

1

INSTALLING THE INDOOR UNIT

1.1

DESCRIPTION OF THE PRODUCT.

Magis Pro 4-6-9 V2 is a heat pump consisting of:
- Magis Pro indoor unit (hereinafter it will only be referred to as
indoor unit);
- Audax Pro 4-6-9 V2 outdoor condensing unit (hereinafter it
will only be referred to as outdoor unit).
Magis Pro V2 is perfectly operational only if the two units are cor-
rectly powered and interconnected.
The indoor unit was designed solely for wall mounted installation
for heating and air conditioning and to produce domestic hot wa-
ter for domestic use and similar purposes.
For normal operation is must be paired with the following out-
door units:
- Audax Pro 4 V2 outdoor condensing unit;
- Audax Pro 6 V2 outdoor condensing unit;
- Audax Pro 9 V2 outdoor condensing unit.
Comply with all of the rules regarding safety and the use of both
appliances.
1.2

INSTALLATION WARNINGS

Operators who install and service the ap-
pliance must wear the personal protec-
tive equipment required by applicable
law.
The place of installation of the appliance and relative
Immergas accessories must have suitable features (tech-
nical and structural), such as to allow for (always in safe,
efficient and comfortable conditions):
- installation (according to the provisions of technical
legislation and technical regulations);
- maintenance operations (including scheduled, peri-
odic, routine and special maintenance);
- removal (to outdoors in the place for loading and
transporting the appliances and components) as well
as the eventual replacement of those with appliances
and/or equivalent components.
The wall surface must be smooth, without any protru-
sions or recesses enabling access to the rear part. They
are not designed to be installed on plinths or floors
(Fig. 1).
Installation must be carried out according to regulation
standards, current legislation and in compliance with
local technical regulations and the required technical
procedures.
OK
The appliance operates with R32 refrig-
erant gas.
This gas is ODOURLESS.
Pay the utmost attention
Strictly follow the instruction handbook
of the Audax Pro V2 outdoor condensing
unit before installation and any type of
operation on the cooling line.
R32 refrigerant gas belongs to the low
flammability refrigerant category: class
A2L according to standard ISO 817. It
guarantees high performance with low
environmental impact. The new gas re-
duces the potential environmental im-
pact by one third compared to R410A,
having less effect on global warning
(GWP 675).
The manufacturer declines all liability in the event of
damage caused by appliances removed from other sys-
tems or for any non-conformities with such equipment.
1
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magis pro 4 v2Magis pro 6 v2Magis pro 9 v2

Table of Contents