Cleaning And Maintenance; Control Panel - Immergas MAGIS PRO Series Instructions And Recommendations

2.2

CLEANING AND MAINTENANCE

To preserve the system's integrity and keep the safety
features, performance and reliability, which distinguish
the assembly, unchanged over time, you must execute
maintenance operations on a yearly basis in compliance
with what is stated in the relative point at "annual check
and maintenance of the appliance", in compliance with
national, regional, or local standards in force.

2.3 CONTROL PANEL

Key (Fig. 22):
1 - Operating mode (winter - air conditioning - summer - stand-
by - off) and parameter confirm button
2 - Menu selection button
3 - Reset and exit menu button
4 - Domestic hot water temperature selection buttons
5 - Heating system temperature selection buttons
6 - Indoor unit pressure gauge
7 - Remote control connection (optional)
8 - Outdoor unit in operation
9 - Not used
10 - Dispensed output level
11 - Operation with external temperature probe active (optional)
28
12 - Connection to other Immergas units
13 - Central heating room mode function active
14 - Temperature indicator, indoor unit info and error codes
15 - Room cooling mode operation active
16 - Operation in cooling mode
17 - Operation in winter mode
18 - Operation in summer mode
19 - Stand-by Mode
20 - Not used
21 - Blocked indoor unit, it needs to be unblocked by pressing the
"RESET" button
22 - Operation in dehumidification mode
23 - DHW production phase operating mode active
22