Table of Contents
Advertisement
Step
Action
5th
Swipe your finger across the sensor of the selected finger scanner.
Repeat this step at least twice. Between each individual finger swipe, the finger scanner
lights up orange if the finger storing process is not complete.
During finger storage (after the first finger has been swiped over the sensor), no more
than 10 sec may pass between each swipe. Otherwise, the finger storing process will be
aborted.
6th
The finger scanner lights up green briefly and then returns to blue. The process of storing
the finger is now complete.
✓
The finger has been stored and can be used at any finger scanner to which the user is
granted access permission. You can now store additional fingers or manage the
permissions of this user.
7.3.2
Storing RFID transponders
Follow the same instructions as for storing fingers, but instead of swiping your finger over the
sensor, hold the RFID transponder next to the finger swipe area of the finger scanner at a distance
of between 1 and 5 cm.
User administration
www.ekey.net
en│13
Advertisement
Table of Contents
