Advertisement
MIDI
To configure the 328XD to send the MMC controls to the DTRS and vice versa, the DTRS option must be
selected in the Tape Machine Setup menu. Enter the Menu pages by pressing the <MENU> button,
and scroll up or down with the PARAM encoder until the 'Tape Mach Setup' menu is highlighted. Press
<ENTER>, scroll until 'Tascam DTRS' is highlighted and press <ENTER> again.
NOTE:
For MMC operation of the DA-38, the MMC-38 unit must be used and selected in the Tape
Machine Setup menu.
Once the Machine Type has been selected, the timecode source must be selected. This should be set to
MTC.
The frame rate must also be selected. The options are 24 frame, 25 frame, 30 drop frame and 30 non-
drop frame. Whichever is selected here must also be selected later when setting up the DTRS.
Once the 328XD has been set up, it is very advisable to store a User Setup of the above settings. Enter
the Menu pages by pressing the <MENU> button and scroll through the menus until 'User Setups' is
highlighted. Press <ENTER> and scroll through to find a vacant setup location. Press <STORE> in the
328XD Snapshot panel.
Soundcraft 328XD and Tascam DTRS
5 5 5 5
Advertisement
