Glowing Ember Placement; Lava Rock; Logo Placement - Napoleon NDX40NT-2 Installation And Operating Instructions Manual

34
7.4

GLOWING EMBER PLACEMENT

Tear the embers into pieces and place on top of the front burner area behind
the charcoal strip. Care should be taken to shred the embers into thin, small
EN
irregular pieces as only the exposed edges of the fi bre hairs will glow. The em-
ber material will only glow when exposed to direct fl ame; however, care
should be taken to not block the burner ports.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and
delayed ignition. PHAZER
certifi ed "glowing embers" and PHAZER
dealer.
7.5

LAVA ROCK

Lava rock should be spread out evenly around the burner on the fi rebox base.
NOTE: Lava rock is not to be placed on the burner.
7.6

LOGO PLACEMENT

Remove the backing of the logo supplied and place on the
glass viewing door or bottom access panel as illustrated.
W415-1596 / 11.25.15
logs glow when exposed to direct fl ame. Use only
TM
logs available from your Authorized
TM
GLOWING EMBERS GLOWING EMBERS
1/2" (13mm)
1/2" (13mm)
1" (25mm)
1/2" (13mm)