elero Solar-Bundle DC Assembly Instructions

Solar-Bundle DC
assembly instructions
General
• Application: Drive system for roller shutters and textile
sun protection independent of the mains current, opera-
tion with solar energy, pre-charged ready for operation
• Power supply: Direct current (12 V) from battery pack
• No wiring necessary to the power supply or control unit
• Limit switch: Electronic with soft shutdown
• Noiseless soft brake
• Special feature: Cut-out when obstacles are detected,
frost protection function, 2 intermediate positions freely
definable
• End positions adjustable via elero hand-held transmitter
• Shaft size: from 50 mm Ø
Standard scope of delivery
• RolSolar drive M-868 DC, solar panel, battery pack with
retaining clips, connection cable MiniPlug, pluggable with
reverse polarity plug connectors, assembly instructions
Accessories
• Charger for separate charging of the battery pack,
Y-cable for DC Solar-Bundle, retaining clips for battery
pack, adapter sets, motor bearings, transmitters
Intended use
The battery pack was designed for use with the RolSolar drive
M-868 DC to store the energy converted by the solar panel
and to operate the drive. Any conversions or other modifica-
tions to the overall system are not permitted. Be careful when
dealing with the overall system, especially the battery pack.
Safety instructions
General safety instructions for use including installation of
motors for roller shutters, awnings, textile sun protection and
Venetian blinds can be found in the "Safety instructions" leaf-
let supplied with each motor. Please read the general safety
instructions and this installation manual carefully as the pro-
cedure in this manual is a prerequisite for correct use of the
product. Any intervention by unqualified personnel or failure to
comply with warnings may lead to personal injuries or materi-
al damage.
All work on the device may only be carried out by a qualified
and approved electrician. Relevant national regulations must
be observed.
Figures included are for illustration purposes only. The illus-
trations may differ from your product in minor details and are
provided for general information only.
elero GmbH continuously strives to improve all products. As a
result, the specifications, features and technology of this prod-
uct may be changed at any time. The information provided is
based on current information at the time of publication.
No claims can be derived from the technical data, images and
information provided in this manual.
Battery pack
Failure to observe the following regulations can lead to fire or
explosion of the battery pack.
• Use the battery pack only for the intended purpose.
• Keep the battery pack away from heat.
• Keep the battery pack dry.
• Do not charge or use dropped or damaged battery packs.
• Do not connect the positive and negative poles of the bat-
tery pack to metallic objects.
• Only use the mains / charger supplied as an accessory
when under supervision.
• Do not open the housing of the battery pack and do not
make any modifications to the battery pack.
The performance of the battery pack decreases after pro-
longed use or frequent discharging.
Recharge with mains / charger available separately.
1
A
B
C
D
E
F
1
Individual components Solar-Bundle DC
2
3
MiniPlug for DC Solar Bundle (233956301)
Connection from the RolSolar drive to the power supply
(battery pack and solar panel or mains/charger) with cable
flag and note DC.
① MinPlug for the drive
② Drive adapter (socket) for the solar panel
③ Power supply plug (battery pack / mains / charger)
Y-cable type A for DC Solar-Bundle (137106801)
For simultaneously connecting the battery pack and mains /
charger or 2 solar panels
Y-cable type B for DC Solar-Bundle (137106901)
For the simultaneous connection of 2 battery packs
Product contents
RolSolar drive M-868 DC
MiniPlug 0.27 m DC Solar
10S1P battery pack: 12 V, 2.1 Ah ("short")
with 2 retaining clips /
10S1P battery pack: 12 V, 2.1 A ("long")
Solar panel 470 x 60 (hole attachment) /
Solar panel 455 x 60 (adhesive attachment)
Assembly instructions RolSolar M-868 DC
Assembly instructions Solar-Bundle DC
2 3
Optional individual components
available
RolSolar(/D+) M10-868 DC
RolSolar(/D+) M10-868 RH DC
RolSolar(/D+) M10-868 SH DC
RolSolar(/D+) M20-868 DC
RolSolar(/D+) M20-868 RH DC
RolSolar(/D+) M20-868 SH DC
Assembly instructions Solar-Bundle DC
Assembly instructions RolSolar
M-868 DC
Y-cable type A for DC Solar
Y-cable type B for DC Solar
Retaining clip for battery pack short
Mains / charger 1.8 m with Molex
connector
4 5
RolSolar drive M-868 DC
Solar panel
MiniPlug
Battery pack
Wall-mounted radio transmitter
MonoTec-868
Item numbers
Based on the bundle
23 395.6301
Gratfrei
burr-free
13 710.4802
G G e e m m ä ä ß ß R R o o H H S S - - R R i i c c h h t t l l i i n n i i e e 2 2 0 0 1 1 1 1 / / 6 6 5 5 E E G G / / a a c c c c o o r r d d i i n n g g t t o o R R o o H H S S d d
- -
16 307.1101 /
- -
13 710.3802
- -
- -
13 124.7001 /
- -
- -
13 125.1901
-
-
-
13 825.0001 -
- -
13 207.0001
Index: Reg. Nr Kurzbeschreibung / Short Comment:
4 5
Item numbers (/D+)
34 220.0001 (34 320.0001)
38 220.0001 (38 320,0001)
39 220.0001 (39 320.0001)
34 230,0001 (34 330,0001)
38 230.0001 (38 330.0001)
39 230.0001 (39 330.0001)
13 207.0001
13 825.0001
13 710.6801
13 710.6901
16 307.1001
13 710.6701
132070001_EN_0220
6
Diese Maße werden be
This dimensions are pa
Lieferantenkennzeichnu
Supplier ID according t
- -
- -
- -
- -
- -
- -
- -
-
-
- -
Da
6