Table of Contents
Advertisement
Prepare the dispenser.
Attention! The location of the hole in the dispenser top is dependent
on the type of dispenser. Be sure to follow Step 3.1 for the
appropriate dispenser.
3.1
Hole location - Harmony (Lancer, Cornelius or Servend), or 110CM Symphony Plus
30" Lancer Sensation and Touchpoint
Back of Top
3.0" ∅
Front of Top
Locate hole position 10" (254 mm) from
back and 9" (229 mm) from right of
dispenser top
Freestyle 9000
REAR OF DISPENSER
LID (UNDERSIDE)
hole saw
FRONT OF DISPENSER LID
(UNDERSIDE)
All others: If your dispenser is not listed or you need help with your installation, please
call our technical service group at (877) 612-5086 or +1 (610) 252-7301.
6
Standard (Cornelius, Lancer, or Servend),
44" Lancer Sensation, and Pepsi Spire 4.1
9.00"
10.00"
Locate hole position 5" (127 mm) from back
of dispenser top
C L
ø3"
hole saw
4"
(102 mm)
ø3.5"
ø3.5"
hole saw
HARMONY and Symphony Plus • RIDE Technology
remote
Dispenser preparation
110CM Symphony Plus
5"
(127 mm)
3.0" ∅
(77,2 mm)
Locate hole position 5" (127 mm) from
back and right of dispenser top
1
ø3"
hole location if using Horizon Ice
Machine with RIDE technology
C L
2
ø3.5"
hole location if using Ice Manager
Diverter Valve System Sensor
Distribution Unit
C L
3
5" (127 mm)
Back of Top
5"
(127 mm)
3.0" ∅
(77,2 mm)
Front of Top
Advertisement
Table of Contents
