Nvr System > Time - Elan EL-NVR-8CH Reference Manual

REFERENCE GUIDE EL-NVR-8CH
NVR SYSTEM (CONT.)
NVR System > Time
To enter NVR settings, 'click' SYSTEM in the left pane where you are allowed to adjust the NVR's
confi guration.
Note:
Do not modify these setting when the NVR is connected to an ELAN controller.
Date/Time:
Set the date/time of the NVR.
ELAN Controller will sync time and date of the NVR automatically.
Date Format:
Modify the date display format.
Time OSD:
Switch on/off the time to be displayed on the screen.
Time Zone:
Change the time zone of the location where the NVR is installed.
Time Sync Mode:
Choose how you would like the time to be synced.
NTP Server:
Enter the NTP server you want to use.
Time Sync Interval:
Choose the interval for the time to be synced.
NTP Status:
The status of connection to selected NTP server will appear here.
Important:
'Click' Apply to save settings.
www.elanhomesystems.com
15
10024106_REV-A_EL-NVR-8CH