ALARM SETUP (CONT.)
'Click' settings (
)to enter NVR SETTINGS, and 'press' ALARM (
ALARM SETUP page. The setting options are described below.
Alarm Setup > Output
ALARM LED
Enable:
Turn On to activate the alarm LED.
Trigger Conditions:
See Channel Events and System Events above for more details.
BUZZER:
Enable:
Turn On to activate the buzzer.
Alarm Time:
Beeping duration of the buzzer when an alarm is triggered.
Note:
SYSTEM SETUP > GENERAL > Buzzer must be enabled.
Trigger Conditions:
See Channel Events and System Events above for more details.
36
10024106_REV-A_EL-NVR-8CH
REFERENCE GUIDE EL-NVR-8CH
) in the left pane to enter the
www.elanhomesystems.com