Camera Setup; Camera Setup > General - Elan EL-NVR-8CH Reference Manual

REFERENCE GUIDE EL-NVR-8CH

CAMERA SETUP

Camera Setup > General
If you are installing an ELAN Cameras and/or ELAN NVR with an ELAN Controller, please refer to the "ELAN
Surveillance" Integration Note for setup and software confi guration. ELAN Integration Notes are served
through the ELAN tools and on elanhomesystems.com/dealer-resources."
The software confi guration information in this document can be used to extend device control parameters
for use within an ELAN controller environment, or be used to operate this hardware independent of an ELAN
controller.
'Click' settings ( )to enter NVR SETTINGS, and 'press' CAMERA (
CAMERA SETUP page. The setting options are described below.
The NVR supports three sets of virtual IP addresses. When TCP/IP is switched On, the NVR can access
the camera or another NVR using the specifi c IP.
Camera Name:
Enter the camera name to be displayed on the streaming screen.
Camera Source:
Allocate a NVR channel for the camera.
IP Address:
Enter the IP address of the camera you want to connect.
Dev. Info:
'Press' to check ONVIF capability.
HTTP Port:
Enter the port for HTTP connection.
RTSP Port:
Enter the port for RTSP connection.
www.elanhomesystems.com
) in the left pane to enter the
10024106_REV-A_EL-NVR-8CH
29