Alarm Setup; Alarm Setup > General - Elan EL-NVR-8CH Reference Manual

ALARM SETUP

'Click' settings ( )to enter NVR SETTINGS, and 'press' ALARM (
ALARM SETUP page. The setting options are described below.
Alarm Setup > General
Alarm Input Type:
Set the alarm sensor to Normally Open (NO), Normally Closed (NC), or IP Camera. The last option will
trigger the alarm only when receiving a signal from IP cameras.
Motion Enable:
Switch On/Off motion detection. Remember also to set the motion detection area in the tab
AREA.
Motion Sensitivity:
Adjust the sensitivity of motion detection. Higher sensitivity indicates that the alarm can be more easily
triggered.
Save Event Snapshot:
Enable to store a snapshot on the hard drive when an alarm is triggered.
34
10024106_REV-A_EL-NVR-8CH
REFERENCE GUIDE EL-NVR-8CH
) in the left pane to enter the
MOTION
www.elanhomesystems.com