Meta Data Setup; Meta Data Setup > General - Elan EL-NVR-8CH Reference Manual

META DATA SETUP

Meta Data Setup > General
The NVR supports various external devices such as GPS or POS, and in this page you are
allowed the change the settings for these devices.
Notes:
• The Meta Data tab is pre-confi gured for IntelliVision enabled ELAN cameras.
• The settings are pre-defi ned for ELAN Surveillance cameras with IntelliVision Analytics.
Modifying these settings is not recommended.
Serial Input:
Select the USB port to which your external device is connected.
Metadata Service:
Turn On to enable using external devices.
Serial Device Server:
Enter the server IP for your serial device.
Server Data Port:
Enter the port of your serial device.
Server Command Port:
Enter the command port of the device.
Emulated Mode:
Choose an emulation type from the drop-down menu (see image below).
44
10024106_REV-A_EL-NVR-8CH
REFERENCE GUIDE EL-NVR-8CH
www.elanhomesystems.com