Nvr System > User - Elan EL-NVR-8CH Reference Manual

NVR SYSTEM (CONT.)
NVR System > User
To enter NVR settings, 'click' SYSTEM in the left pane. This allows you to adjust the NVR's confi guration.
The NVR supports up to 15 sets of individual user settings (including default user administrator,
operator, and guest), allowing you to assign different access privileges.
User:
Enter the name of the user (applicable only to User01–12).
Old Password, New Password, and Confi rm Password:
If you would like to change the password, enter your previous password and enter the new password
and confi rm the password. 'Press' Show to reveal the password. The default passwords for
administrator, operator, and guest are 3526, 2222, and 3333, respectively.
User Permission:
Set the access privileges of the user to administrator, operator, or guest.
Load Default:
Restore to the default settings.
16
10024106_REV-A_EL-NVR-8CH
REFERENCE GUIDE EL-NVR-8CH
www.elanhomesystems.com