Removal Of Major Components - Gree FLEXX Series Service Manual

GREE

4.5 Removal of Major Components

4.5.1 Removal of ODU Major Components
Picture Name
Through compression, the low pressure refrigerant occupies a less space.
Compressor As its pressure and temperature both rise, it becomes high pressure and
high temperature refrigerant. It is the power drive of the system.
4-way valve It is used to change directions, the flow of refrigerant in cooling/heating.
The power drive of the fan. It enables the fan to run so as to provide
Motor smooth currents of air for forced convection and heat exchange of
condenser and evaporator.
It is used to provide smooth currents of air for forced convection and heat
Fan
exchange of condenser and evaporator.
Installed at the suction side of compressor, it can separate the liquefied
refrigerant from the gaseous refrigerant to make sure that only gaseous
Gas liquid
refrigerant will be sucked into the compressor. If liquefied refrigerant gets
separator
inside the compressor, ineffective compressor or slugging phenomenon
will occur.
69
DC INVERTER HEAT PUMP CONDENSING UNIT
Function