Water Flow And Water Temperature; Warranty Conditions - Takagi GS-20W-AU5 Installation Manual And Owners Manual

21. WATER FLOW AND WATER TEMPERATURE

The chart is based on properly sized gas line.
GS-26W-AU5/6
Set Temp.(℃)
GS-20W-AU5/6
Set Temp.(℃)
• The flow rate through the water heater is limited to a maximum of 26.0 or 20.0 l/min.
• The temperature setting, along with the supply temperature of the water will determine
the flow rate output of the unit.
• Please refer to the temperature vs. litre per minute chart to determine the likely flow
rates based on your local ground water temperature and outlet water temperature com-
bination.

22. WARRANTY CONDITIONS

Please contact 1800-697-652 for full warranty conditions and Service information.
28
7N0096