Water Flow And Water Temperature; Warranty Conditions - Takagi GS-2000W-AU Installation Manual

WATER FLOW AND WATER TEMPERATURE

The chart is based on properly sized gas line.
GS-2600W-AU
Set Temp.(℃)
GS-2000W-AU
Set Temp.(℃)
• The flow rate through the water heater is limited to a maximum of 26.0 (or 20.0) l/min.
• The temperature setting, along with the supply temperature of the water will determine the flow
rate output of the unit.
• Please refer to the temperature vs. litre per minute chart to determine the likely flow rates based
on your local ground water temperature and your desired outlet water temperature combination.
Please contact 1800-697-652 for full warranty conditions and Service information.

WARRANTY CONDITIONS

28
4B0012-1