Table of Contents
Advertisement
TECHNICAL DATA
TROUBLESHOOTING
The Air purifier does not
work
No clean air is delivered
or performance is poor
Abnormal noise during
operation
If the troubleshooting section fails to resolve your issue contact the electriQ support centre for
further assistance.
MODEL
POWER SUPPLY
AIR FLOW VOLUME (M
NET WEIGHT:
NOISE LEVEL DB(A):
POWER CONSUMPTION (W):
DIMENSIONS (WXDXH)：
NEGATIVE IONS：
• Is the power adaptor disconnected from the wall socket?
• Is the power adaptor connected to the rear of the unit?
• Is the socket switched on?
• The base cover may not be installed correctly, try to remove and
reinstall.
• Ensure the filters are clean and the packaging was removed from
the filter cartridge.
• Ensure that the filter cartridge is installed.
• Set the unit to high fan speed.
• Investigate if the air purifier is used in a room matching its size
and enough operation time is allowed for larger rooms.
• Check if the packaging from the filter cartridge was removed
during the filter change.
• Air inlet or outlets may be blocked. Remove any obstruction and
try again.
• Ensure the unit is on a flat solid surface.
EAPDC150HCST
DC 24V/1A
3
/H):
≥ 106M
≤38DB(A)
Φ180XH282(MM)
≥ 5.0X10
8
3
/H
1.6KG
16W
6
3
IONS/CM
Advertisement
Table of Contents
