Materials Provided With Tracvision Cruiser; Additional Materials Required For Tracvision Cruiser Use - KVH Industries TracVision Cruiser User Manual

the IRDs. The multiswitch contains relays that select the proper
output from the antenna LNB to send to the IRD. In multiple
IRD installations, all IRDs must be for the same satellite
television service (i.e., DIRECTV or DISH Network).
1.3 Materials Provided with
TracVision Cruiser
Table 1-1 lists the units, cables, and materials packed in the
TracVision Cruiser package by name and KVH part number.
Component
Antenna Unit (comprising):
Baseplate Assembly
Radome Assembly
Stiffening Plate
RF Cable
Power Cable
Data Cable
Kitpack*
Installation and Operation Manual
* A complete listing of kitpack contents is provided in Section 2.1.2, "Kitpack."
1.3.1 Additional Materials Required for
TracVision Cruiser Use
To make full use of your new TracVision Cruiser and receive
satellite TV on the water, you will need to provide/purchase
the following:
•
Television
•
Appropriate IRD for your selected satellite
TV service (if using the DISH Network, a
Series 4000 or 5000 IRD will be required)
•
Sealing materials to weatherproof cable holes
and seal mounting plate
•
Optional KVH EchoStar Adapter (for use with
the DISH Network service and IRD)
54-0144 Rev. C
KVH Part No.
01-0225
02-0952
02-0953
20-0684
32-0589-60
32-0590-60
32-0591-60
72-0094
54-0144
Table 1-1
TracVision Cruiser
Packing List
Cables for the TracVision Cruiser
are stored beneath the antenna unit
during shipping.
Operation of the DISH Network
requires the purchase of an
EchoStar IRD Adapter. The
adapter is not shipped in the main
TracVision Cruiser container. To
purchase an EchoStar Adapter,
contact KVH or your local KVH
dealer and ask for KVH Product
Number 02-0899.
Introduction
1-3