Power On The Device - Juniper SRX320 Quick Start Manual

Figure 6: Connecting the Grounding Cable
Grounding
screw

Power On the Device

NOTE: Before connecting the device to the power supply, attach an ESD strap to an ESD point and place the
other end of the strap around your bare wrist.
1. Plug the DC connector end of the power cable into the power connector on the rear of the device.
Figure 7: Connecting the Power Cable
2. Plug the AC adapter end of the power cable into an AC power outlet.
3. Turn on the power to the AC power receptacle.
4. Note the following LED indications. Wait until the STAT LED is solid green before proceeding to the next step.
Grounding point
on the chassis
Grounding lug
8