Battery & Hub; Led Indicators And Sounds; Long-Term Storage - SRAM Ematic Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
b A t t E R y & h u b
• no memory effect; the battery does not require full charge or full discharge between charging cycles.
• Capacity will slowly decrease with use at the rate of ~20% per 500 full discharge-charge cycles.
lithium-ion Battery
9.7 Ah/350 Wh
7.7 Ah/280 Wh
5.8 Ah/210 Wh
* Distance is dependent on conditions & terrain
L E d I N d I C A t o R S A N d S o u N d S
• Pushing the button on the top of the battery will cause the fuel gage
lEDs to illuminate for several seconds, indicating battery charge level.
• Pushing the power button will cause all the fuel gage LEDs to flash for a
fraction of a second, followed by three beeps from the battery, and three
beeps from the hub, indicating they are operating properly.
• The battery will beep twice every five minutes when the charge level is
below 5%. Charge the battery immediately in this case.
• A continuous series of beeps from the hub indicates an error.
L o N g - t E R M S t o R A g E
• Store in a cool, dry place when not in use.
• inspect the charge status every three months and recharge to 50% when necessary. the battery can
become permanently damaged if left completely discharged.
Voltage
Distance*
50-95 km (31-59 miles)
36.2 V
40-80 km (25-50 miles)
30-60 km (19-37 miles)
Charge Time
(approximate)
4.25 hrs
3.5 hrs
2.5 hrs
CHARGE lEVEl
1-10%
11-20%
21-40%
41-60%
61-80%
81-100%
Battery & HuB
13

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ematic and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents