Operation - Klarstein Eiszeit Manual

OPERATION

1. Plug in the machine into the socket.
2. Open the water reservoir access door and add water as sketch A or B.
Sketch A
Add water manual
Add water by manual.
Note: If the unit is on ice making,indicator
ice,then add water to the water reservoir,but please take out the ice fi rst, then add
one full cup of water so as to avoid overfl ow of water when the ice melt.
3. Press ON/OFF button to start the machine.
4. Water will be pumped into the water tray from the water reservoir automatically,this
takes about 30 seconds
Note: If no water is pumped to the water tray over two cycles but the water in
reservoir is enough, then please open the drain cap, and let several drops water
runs out. Then press ON/OFF button again to restart the unit.
5. Select the button S,M,L,SELECT to choose the ice size you may need.
Note: when temperature lower than 15 degrees, SMALL is recommended,when
temperature over 30 degrees, LARGE ice is recommended.
Sketch B
A to
water pipe
B to
water faucet
C to unit
Connect unit to water faucet.
is on,but want to make more
EN
17