Control Panel Operation - Klarstein Passau Manual

EN

CONTROL PANEL OPERATION

Plug in the power supply and the "L" indicator flashes. Press the"POWER" button,
POWER
the "L" indicator light is always on, the machine will start the deicing function first,
then automaticallymake the ice according to the selected mode, deicing after the
completion of ice making, and then enter the deicing function,such a cycle.
Select the ice size mode, and the default mode is large ice making mode for each
SELECT
startup. Select the mode: "S" for small ice selection, "L" for large ice selection and
the corresponding indicator light is on. The production time of small ice is more
than 8 minutes and that of large ice is more than 9 minutes.
ADD WATER: water shortage alarm
When the "ADD WATER" light flashes, it means that there is water shortage in the
ADD WATER
water tank. You need to add water and press the POWER button to restart the
machine.
ICE FULL: Ice full alarm
When the ice reaches the maximum amount of ice storage container, the "ICE
ICE FULL
FULL" light flashes and the machine stops. At this time, the ice needs to be poured
out. When the ice position is lower than the full sensor position, the machine will
restart automatically.
Press the "POWER" button for 3 seconds, and the machine will enter the self-
CLEANING FUNCTION
cleaning mode. The water pump will pump water and the water box will pour
water. After 5 cycles, the machine will stop and enter the standby mode.
20