Restore Factory Settings - HomeMatic HmIP-WRCR Mounting Instruction And Operating Manual

6x long red
flashing
1x orange
and 1 x green
lighting (after
inserting
batteries)
*Flashing code can be deactivated in the settings
9

Restore factory settings

The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the device, proceed as
follows:
Once mounted, the electronic unit (B) can easily
•
be pulled out of the mounting plate. To remove
the electronic unit from the frame, take hold of
the sides of the electronic unit and pull it out (see
figure 2).
Press and hold down the system button (E) for 4
•
seconds with a pointed object (e.g. a pen) until
the LED (E) starts flashing orange quickly (see
figure 14).
• Release the system button again.
Device
defective
Test display
Restore factory settings
Have a look at
your app for
error message
or contact your
retailer.
After the test
display has
stopped, you can
continue.
49