Mounting In Existing Switches - HomeMatic HmIP-WRCR Mounting Instruction And Operating Manual

• Select suitable tool, measuring equipment and, if necessary,
personal safety equipment;
• Evaluation of measuring results;
• Selection of electrical installation material for safeguarding
shut-off conditions;
• IP protection types;
• Installation of electrical installation material;
• Type of supply network (TN system, IT system, TT system) and
the resulting connecting conditions (classical zero balancing,
protective earthing, required additional measures etc.).
5.2.4

Mounting in existing switches

You can mount the device with the frame (A) provided or
use it with frames of other manufacturers. The electronic
unit (B) can also be integrated into a multi-gang frame
(see figure 12). You can flexibly fix the mounting plate (D)
to the wall using adhesive strips or screws. For mounting
with multiple combinations, make sure that the mounting
plate of the device is seamlessly aligned to the already
fixed mounting plate/retaining ring.
An overview of compatible switch series is available in the
download area of www.homematic-ip.com.
Start-up
43