Operation; Before Using; Starting Up; Warning Light - Zanussi ZI 8454 X Instruction Booklet

OPERATION

A = ÇMains OnÈ light
B = Freezer alarm light
C = Freezer electronic thermometer
D = Fast Freeze indicator (S)
E = Main On/Off switch
F = Freezer and Fast Freeze (S) temperature control
knob
G = Refrigerator temperature control knob

Before using

Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may
linger. Dry thoroughly.

Starting up

¥ Turn switch E until the pointer is opposite the ÇIÈ
symbol (pilot lights A and B will come on).
¥ Turn refrigerator temperature knob G and freezer
temperature knob F to the required position; in
general a mid position is best (the lower the
number, the warmer the temperature).
¥ Pilot light D comes on when knob F is tumed to
position ÇSÈ.
The refrigerator and freezer are switched off by
turning switch E to position ÇOÈ.

Warning light

The alarm light B indicates when the temperature
inside the freezer compartment has risen to a point
at which safe storage of frozen foods can no longer
be guaranteed. When the appliance is first started
up, or after having loaded a quantity of food to be
frozen, this warning light will stay on until a safe
storage temperature has been reached.
A B C D
E F

Electronic thermometer

The electronic thermostat C consists of 6 pilot lights.
Each light corresponds to a temperature inside the
freezer. Frequent or prolonged opening of the doors
may slightly modify the temperature indicated.
Temperature variations can also occur if excessive
quantities of food are loaded into the freezer (see
freezing capacity).
G
5