Zanussi ZI 8454 X Instruction Booklet page 19

¥ If using a 100 mm plinth, fit the complete height
compensation strip.
Alignment height of 870 mm
¥ If using a 190 to 220 mm plinth, make a cut-out
as shown.
¥ If using a plinth higher than 150 mm but less
than 190 mm, cut the height compensation strip
supplied with the appliance to the required depth
and fit it between the plinth and the ventilation
grille.
¥ If using a 150 mm plinth, fit the complete height
compensation strip.
¥ If the appliance is installed at the end of a row of
units, insert foot E to hold the plinth in place.
100
150
30
100
E
19